Check Your Garage Door Track to Ensure Perfect Working Condition

The garage door track is the most commonly damaged part of the garage aside from the face of the garage. Oftentimes it goes unnoticed while it puts additional stress on the motor silently doing lasting damage to your garage, and other times it creates a loud creek or banging noise making the problem more evident. Whichever the case, be sure to check your garage track regularly to keep it in top condition. Here is a step by step guide on how to check your garage track to keep it in working condition for as long as possible.

Listen for Unusual Noise Coming From the Track

While tension coming from the track will not always make a noise, it often will. When opening your garage, listen for creeks or rubbing noises. This could be an indicator that there is unwanted friction on the track. Bakersfield garage door repairs are often instigated by a strange sound coming from the garage because noises are good indicators of possible needed maintenance.

Visually Check the Track

Look at both sides of the track and take note of any damage that you may see. Most damage is found near the bottom of the track but be sure to check the entire track as damage can occur anywhere. Make sure that there are not any dents or bends on the track and that the track is even and symmetrical. Dents and bends put stress on the mechanical components and could cause larger problems if they are not addressed.

Feel the Track to Check for Other Damage

There are some parts of the track that you are not able to see that could be damaged. Be sure to run your finger along these parts to make sure that there is not a hidden dent or bulge. Be sure not to run your finger along the track too quickly because this could result in hurting your finger. Instead, run it along the edge slowly and controlled while you pay close attention to any damage. If you follow these tips, you should be able to identify if there is any damage to your track.