Quick answer: Close the door first if you can, then pull the red emergency release cord straight down to disconnect the door from the opener. Lift the door from the middle using the handle. When power returns, pull the cord toward the door or run the opener to re-engage the trolley.
Every Bakersfield homeowner should know how to use the emergency release before they need it. During an outage, a stuck door can keep you from getting to work, an appointment or out of harm’s way.
Step by Step
- If possible, make sure the door is fully closed. Releasing a partly open door can let it drop if a spring is weak.
- Pull the red cord hanging from the opener rail straight down. You will hear the trolley disengage.
- Lift the door from the bottom center or the handle. A balanced door should rise with moderate effort and stay put halfway up.
- To lock it while power is out, use the manual slide lock if your door has one.
If the Door Is Too Heavy
A properly balanced door should not take two people to lift. If it does, a spring is probably broken or worn. Do not prop the door with boards or let it slam down. Lower it carefully and call for spring repair.
Reconnecting the Opener
Once power is back, run the opener. On most models the trolley will travel along the rail and click back onto the door carriage. Some models require you to pull the cord toward the door to reset it. Test the safety reverse afterward.
Avoid Future Lockouts
Consider an opener with battery backup, required on new California installs since 2019. Also make sure the release cord hangs at a reachable height, about six feet off the floor, and keep the area under it clear.
Frequently Asked Questions
Is it safe to pull the emergency release with the door open?
It can be risky. If a spring is broken, the door can slam shut. Release it with the door closed whenever possible.
Why won’t my opener reconnect after the outage?
The trolley may need to be reset by pulling the cord toward the door, or the opener may need its travel limits reset.
Can I lock my garage door without the opener?
Yes, use the manual slide lock on the inside of the door, if equipped.
Need a hand? Contact Precision Door of Bakersfield to schedule service anywhere in the Bakersfield area. Our technicians carry the common parts on the truck, explain your options before any work starts, and stand behind the repair.










